You're looking at an old version of this specification.

Switch to the current stable release.

Appendices

Unpadded Base64

Unpadded Base64 refers to ‘standard’ Base64 encoding as defined in RFC 4648, without “=” padding. Specifically, where RFC 4648 requires that encoded data be padded to a multiple of four characters using = characters, unpadded Base64 omits this padding.

For reference, RFC 4648 uses the following alphabet for Base 64:

Value Encoding  Value Encoding  Value Encoding  Value Encoding
    0 A            17 R            34 i            51 z
    1 B            18 S            35 j            52 0
    2 C            19 T            36 k            53 1
    3 D            20 U            37 l            54 2
    4 E            21 V            38 m            55 3
    5 F            22 W            39 n            56 4
    6 G            23 X            40 o            57 5
    7 H            24 Y            41 p            58 6
    8 I            25 Z            42 q            59 7
    9 J            26 a            43 r            60 8
   10 K            27 b            44 s            61 9
   11 L            28 c            45 t            62 +
   12 M            29 d            46 u            63 /
   13 N            30 e            47 v
   14 O            31 f            48 w
   15 P            32 g            49 x
   16 Q            33 h            50 y

Examples of strings encoded using unpadded Base64:

UNPADDED_BASE64("") = ""
UNPADDED_BASE64("f") = "Zg"
UNPADDED_BASE64("fo") = "Zm8"
UNPADDED_BASE64("foo") = "Zm9v"
UNPADDED_BASE64("foob") = "Zm9vYg"
UNPADDED_BASE64("fooba") = "Zm9vYmE"
UNPADDED_BASE64("foobar") = "Zm9vYmFy"

When decoding Base64, implementations SHOULD accept input with or without padding characters wherever possible, to ensure maximum interoperability.

Binary data

In some cases it is necessary to encapsulate binary data, for example, public keys or signatures. Given that JSON cannot safely represent raw binary data, all binary values should be encoded and represented in JSON as unpadded Base64 strings as described above.

In cases where the Matrix specification refers to either opaque byte or opaque Base64 values, the value is considered to be opaque AFTER Base64 decoding, rather than the encoded representation itself.

It is safe for a client or homeserver implementation to check for correctness of a Base64-encoded value at any point, and to altogether reject a value which is not encoded properly. However, this is optional and is considered to be an implementation detail.

Special consideration is given for future protocol transformations, such as those which do not use JSON, where Base64 encoding may not be necessary in order to represent a binary value safely. In these cases, Base64 encoding of binary values may be skipped altogether.

Signing JSON

Various points in the Matrix specification require JSON objects to be cryptographically signed. This requires us to encode the JSON as a binary string. Unfortunately the same JSON can be encoded in different ways by changing how much white space is used or by changing the order of keys within objects.

Signing an object therefore requires it to be encoded as a sequence of bytes using Canonical JSON, computing the signature for that sequence and then adding the signature to the original JSON object.

Canonical JSON

To ensure that all implementations use the same JSON encoding we define “Canonical JSON”. This should not be confused with other uses of “Canonical JSON” outside of the specification.

We define this encoding for a value to be the shortest UTF-8 JSON encoding with dictionary keys lexicographically sorted by Unicode codepoint. Numbers in the JSON must be integers in the range [-(2**53)+1, (2**53)-1], represented without exponents or decimal places, and negative zero -0 MUST NOT appear.

We pick UTF-8 as the encoding as it should be available to all platforms and JSON received from the network is likely to be already encoded using UTF-8. We sort the keys to give a consistent ordering. We force integers to be in the range where they can be accurately represented using IEEE double precision floating point numbers since a number of JSON libraries represent all numbers using this representation.

import json

def canonical_json(value):
    return json.dumps(
        value,
        # Encode code-points outside of ASCII as UTF-8 rather than \u escapes
        ensure_ascii=False,
        # Remove unnecessary white space.
        separators=(',',':'),
        # Sort the keys of dictionaries.
        sort_keys=True,
        # Encode the resulting Unicode as UTF-8 bytes.
    ).encode("UTF-8")

Grammar

Adapted from the grammar in http://tools.ietf.org/html/rfc7159 removing insignificant whitespace, fractions, exponents and redundant character escapes.

value     = false / null / true / object / array / number / string
false     = %x66.61.6c.73.65
null      = %x6e.75.6c.6c
true      = %x74.72.75.65
object    = %x7B [ member *( %x2C member ) ] %7D
member    = string %x3A value
array     = %x5B [ value *( %x2C value ) ] %5B
number    = [ %x2D ] int
int       = %x30 / ( %x31-39 *digit )
digit     = %x30-39
string    = %x22 *char %x22
char      = unescaped / %x5C escaped
unescaped = %x20-21 / %x23-5B / %x5D-10FFFF
escaped   = %x22 ; "    quotation mark  U+0022
          / %x5C ; \    reverse solidus U+005C
          / %x62 ; b    backspace       U+0008
          / %x66 ; f    form feed       U+000C
          / %x6E ; n    line feed       U+000A
          / %x72 ; r    carriage return U+000D
          / %x74 ; t    tab             U+0009
          / %x75.30.30.30 (%x30-37 / %x62 / %x65-66) ; u000X
          / %x75.30.30.31 (%x30-39 / %x61-66)        ; u001X

Examples

To assist in the development of compatible implementations, the following test values may be useful for verifying the canonical transformation code.

Given the following JSON object:

{}

The following canonical JSON should be produced:

{}

Given the following JSON object:

{
    "one": 1,
    "two": "Two"
}

The following canonical JSON should be produced:

{"one":1,"two":"Two"}

Given the following JSON object:

{
    "b": "2",
    "a": "1"
}

The following canonical JSON should be produced:

{"a":"1","b":"2"}

Given the following JSON object:

{"b":"2","a":"1"}

The following canonical JSON should be produced:

{"a":"1","b":"2"}

Given the following JSON object:

{
    "auth": {
        "success": true,
        "mxid": "@john.doe:example.com",
        "profile": {
            "display_name": "John Doe",
            "three_pids": [
                {
                    "medium": "email",
                    "address": "[email protected]"
                },
                {
                    "medium": "msisdn",
                    "address": "123456789"
                }
            ]
        }
    }
}

The following canonical JSON should be produced:

{"auth":{"mxid":"@john.doe:example.com","profile":{"display_name":"John Doe","three_pids":[{"address":"[email protected]","medium":"email"},{"address":"123456789","medium":"msisdn"}]},"success":true}}

Given the following JSON object:

{
    "a": "日本語"
}

The following canonical JSON should be produced:

{"a":"日本語"}

Given the following JSON object:

{
    "本": 2,
    "日": 1
}

The following canonical JSON should be produced:

{"日":1,"本":2}

Given the following JSON object:

{
    "a": "\u65E5"
}

The following canonical JSON should be produced:

{"a":"日"}

Given the following JSON object:

{
    "a": null
}

The following canonical JSON should be produced:

{"a":null}

Given the following JSON object:

{
    "a": -0,
    "b": 1e10
}

The following canonical JSON should be produced:

{"a":0,"b":10000000000}

Signing Details

JSON is signed by encoding the JSON object without signatures or keys grouped as unsigned, using the canonical encoding described above. The JSON bytes are then signed using the signature algorithm and the signature is encoded using unpadded Base64. The resulting base64 signature is added to an object under the signing key identifier which is added to the signatures object under the name of the entity signing it which is added back to the original JSON object along with the unsigned object.

The signing key identifier is the concatenation of the signing algorithm and a key identifier. The signing algorithm identifies the algorithm used to sign the JSON. The currently supported value for signing algorithm is ed25519 as implemented by NACL (http://nacl.cr.yp.to/). The key identifier is used to distinguish between different signing keys used by the same entity.

The unsigned object and the signatures object are not covered by the signature. Therefore intermediate entities can add unsigned data such as timestamps and additional signatures.

{
   "name": "example.org",
   "signing_keys": {
     "ed25519:1": "XSl0kuyvrXNj6A+7/tkrB9sxSbRi08Of5uRhxOqZtEQ"
   },
   "unsigned": {
      "age_ts": 922834800000
   },
   "signatures": {
      "example.org": {
         "ed25519:1": "s76RUgajp8w172am0zQb/iPTHsRnb4SkrzGoeCOSFfcBY2V/1c8QfrmdXHpvnc2jK5BD1WiJIxiMW95fMjK7Bw"
      }
   }
}
def sign_json(json_object, signing_key, signing_name):
    signatures = json_object.pop("signatures", {})
    unsigned = json_object.pop("unsigned", None)

    signed = signing_key.sign(encode_canonical_json(json_object))
    signature_base64 = encode_base64(signed.signature)

    key_id = "%s:%s" % (signing_key.alg, signing_key.version)
    signatures.setdefault(signing_name, {})[key_id] = signature_base64

    json_object["signatures"] = signatures
    if unsigned is not None:
        json_object["unsigned"] = unsigned

    return json_object

Checking for a Signature

To check if an entity has signed a JSON object an implementation does the following:

  1. Checks if the signatures member of the object contains an entry with the name of the entity. If the entry is missing then the check fails.
  2. Removes any signing key identifiers from the entry with algorithms it doesn’t understand. If there are no signing key identifiers left then the check fails.
  3. Looks up verification keys for the remaining signing key identifiers either from a local cache or by consulting a trusted key server. If it cannot find a verification key then the check fails.
  4. Decodes the base64 encoded signature bytes. If base64 decoding fails then the check fails.
  5. Removes the signatures and unsigned members of the object.
  6. Encodes the remainder of the JSON object using the Canonical JSON encoding.
  7. Checks the signature bytes against the encoded object using the verification key. If this fails then the check fails. Otherwise the check succeeds.

Identifier Grammar

Some identifiers are specific to given room versions, please refer to the room versions specification for more information.

Common Namespaced Identifier Grammar

[Added in v1.2]

The specification defines some identifiers to use the Common Namespaced Identifier Grammar. This is a common grammar intended for non-user-visible identifiers, with a defined mechanism for implementations to create new identifiers.

The grammar is defined as follows:

  • An identifier must be at least one character and at most 255 characters in length.
  • Identifiers must start with one of the characters [a-z], and be entirely composed of the characters [a-z], [0-9], -, _ and ..
  • Identifiers starting with the characters m. are reserved for use by the official Matrix specification.
  • Identifiers which are not described in the specification should follow the Java Package Naming Convention to namespace their identifier. This is typically a reverse DNS format, such as com.example.identifier.

Server Name

A homeserver is uniquely identified by its server name. This value is used in a number of identifiers, as described below.

The server name represents the address at which the homeserver in question can be reached by other homeservers. All valid server names are included by the following grammar:

server_name = hostname [ ":" port ]

port        = 1*5DIGIT

hostname    = IPv4address / "[" IPv6address "]" / dns-name

IPv4address = 1*3DIGIT "." 1*3DIGIT "." 1*3DIGIT "." 1*3DIGIT

IPv6address = 2*45IPv6char

IPv6char    = DIGIT / %x41-46 / %x61-66 / ":" / "."
                  ; 0-9, A-F, a-f, :, .

dns-name    = 1*255dns-char

dns-char    = DIGIT / ALPHA / "-" / "."

— in other words, the server name is the hostname, followed by an optional numeric port specifier. The hostname may be a dotted-quad IPv4 address literal, an IPv6 address literal surrounded with square brackets, or a DNS name.

IPv4 literals must be a sequence of four decimal numbers in the range 0 to 255, separated by .. IPv6 literals must be as specified by RFC3513, section 2.2.

DNS names for use with Matrix should follow the conventional restrictions for internet hostnames: they should consist of a series of labels separated by ., where each label consists of the alphanumeric characters or hyphens.

Examples of valid server names are:

  • matrix.org
  • matrix.org:8888
  • 1.2.3.4 (IPv4 literal)
  • 1.2.3.4:1234 (IPv4 literal with explicit port)
  • [1234:5678::abcd] (IPv6 literal)
  • [1234:5678::abcd]:5678 (IPv6 literal with explicit port)

Server names must be treated case-sensitively: in other words, @user:matrix.org is a different person from @user:MATRIX.ORG.

Some recommendations for a choice of server name follow:

  • The length of the complete server name should not exceed 230 characters.
  • Server names should not use upper-case characters.

Common Identifier Format

The Matrix protocol uses a common format to assign unique identifiers to a number of entities, including users, events and rooms. Each identifier takes the form:

&string

where & represents a ‘sigil’ character; string is the string which makes up the identifier.

The sigil characters are as follows:

  • @: User ID
  • !: Room ID
  • $: Event ID
  • #: Room alias

User IDs, room IDs, room aliases, and sometimes event IDs take the form:

&localpart:domain

where domain is the server name of the homeserver which allocated the identifier, and localpart is an identifier allocated by that homeserver.

The precise grammar defining the allowable format of an identifier depends on the type of identifier. For example, event IDs can sometimes be represented with a domain component under some conditions - see the Event IDs section below for more information.

User Identifiers

[Changed in v1.8]

Users within Matrix are uniquely identified by their Matrix user ID. The user ID is namespaced to the homeserver which allocated the account and has the form:

@localpart:domain

The localpart of a user ID is an opaque identifier for that user. It MUST NOT be empty, and MUST contain only the characters a-z, 0-9, ., _, =, -, /, and +.

The domain of a user ID is the server name of the homeserver which allocated the account.

The length of a user ID, including the @ sigil and the domain, MUST NOT exceed 255 characters.

The complete grammar for a legal user ID is:

user_id = "@" user_id_localpart ":" server_name
user_id_localpart = 1*user_id_char
user_id_char = DIGIT
             / %x61-7A                   ; a-z
             / "-" / "." / "=" / "_" / "/" / "+"

Matrix user IDs are sometimes informally referred to as MXIDs.

Historical User IDs

Older versions of this specification were more tolerant of the characters permitted in user ID localparts. There are currently active users whose user IDs do not conform to the permitted character set, and a number of rooms whose history includes events with a sender which does not conform. In order to handle these rooms successfully, clients and servers MUST accept user IDs with localparts from the expanded character set:

extended_user_id_char = %x21-39 / %x3B-7E  ; all ASCII printing chars except :
Mapping from other character sets

In certain circumstances it will be desirable to map from a wider character set onto the limited character set allowed in a user ID localpart. Examples include a homeserver creating a user ID for a new user based on the username passed to /register, or a bridge mapping user ids from another protocol.

Implementations are free to do this mapping however they choose. Since the user ID is opaque except to the implementation which created it, the only requirement is that the implementation can perform the mapping consistently. However, we suggest the following algorithm:

  1. Encode character strings as UTF-8.
  2. Convert the bytes A-Z to lower-case.
    • In the case where a bridge must be able to distinguish two different users with ids which differ only by case, escape upper-case characters by prefixing with _ before downcasing. For example, A becomes _a. Escape a real _ with a second _.
  3. Encode any remaining bytes outside the allowed character set, as well as =, as their hexadecimal value, prefixed with =. For example, # becomes =23; á becomes =c3=a1.

Room IDs

A room has exactly one room ID. A room ID has the format:

!opaque_id:domain

The domain of a room ID is the server name of the homeserver which created the room. The domain is used only for namespacing to avoid the risk of clashes of identifiers between different homeservers. There is no implication that the room in question is still available at the corresponding homeserver.

Room IDs are case-sensitive. They are not meant to be human-readable. They are intended to be treated as fully opaque strings by clients.

Room Aliases

A room may have zero or more aliases. A room alias has the format:

#room_alias:domain

The domain of a room alias is the server name of the homeserver which created the alias. Other servers may contact this homeserver to look up the alias.

Room aliases MUST NOT exceed 255 bytes (including the # sigil and the domain).

Event IDs

An event has exactly one event ID. Event IDs take the form:

$opaque_id

However, the precise format depends upon the room version specification: early room versions included a domain component, whereas more recent versions omit the domain and use a base64-encoded hash instead.

Event IDs are case-sensitive. They are not meant to be human-readable. They are intended to be treated as fully opaque strings by clients.

URIs

There are two major kinds of referring to a resource in Matrix: matrix.to and matrix: URI. The specification currently defines both as active/valid ways to refer to entities/resources.

Rooms, users, and aliases may be represented as a URI. This URI can be used to reference particular objects in a given context, such as mentioning a user in a message or linking someone to a particular point in the room’s history (a permalink).

Matrix URI scheme

[Added in v1.2]

The Matrix URI scheme is defined as follows ([] enclose optional parts, {} enclose variables):

matrix:[//{authority}/]{type}/{id without sigil}[/{type}/{id without sigil}...][?{query}][#{fragment}]

As a schema, this can be represented as:

MatrixURI = "matrix:" hier-part [ "?" query ] [ "#" fragment ]
hier-part = [ "//" authority "/" ] path
path = entity-descriptor ["/" entity-descriptor]
entity-descriptor = nonid-segment / type-qualifier id-without-sigil
nonid-segment = segment-nz ; as defined in RFC 3986
type-qualifier = segment-nz "/" ; as defined in RFC 3986
id-without-sigil = string ; as defined in Matrix identifier spec above
query = query-element *( "&" query-item )
query-item = action / routing / custom-query-item
action = "action=" ( "join" / "chat" )
routing = "via=” authority
custom-query-item = custom-item-name "=" custom-item-value
custom-item-name = 1*unreserved ; reverse-DNS name
custom-item-value =

Note that this format is deliberately following RFC 3986 to ensure maximum compatibility with existing tooling. The scheme name (matrix) is registered alongside other schemes by the IANA here.

Currently, the authority and fragment are unused by this specification, though are reserved for future use. Matrix does not have a central authority which could reasonably fill the authority role. nonid-segment in the schema is additionally reserved for future use.

The type denotes the kind of entity which is described by id without sigil. Specifically, the following mappings are used:

  • r for room aliases.
  • u for users.
  • roomid for room IDs (note the distinction from room aliases).
  • e for events, when after a room reference (r or roomid).

The id without sigil is simply the identifier for the entity without the defined sigil. For example, !room:example.org becomes room:example.org (! is the sigil for room IDs). The sigils are described under the Common Identifier Format.

The query is optional and helps clients with processing the URI’s intent. In this specification are the following:

  • action - Helps provide intent for what the client should do specifically with the URI. Lack of an action simply indicates that the URI is identifying a resource and has no suggested action associated with it - clients could treat this as navigating the user to an informational page, for example.
    • action=join - Describes an intent for the client to join the room described by the URI and thus is only valid on URIs which are referring to a room (it has no meaning and is ignored otherwise). The client should prompt for confirmation prior to joining the room, if the user isn’t already part of the room.
    • action=chat - Describes an intent for the client to start/open a DM with the user described by the URI and thus is only valid on URIs which are referring to a user (it has no meaning and is ignored otherwise). Clients supporting a form of Canonical DMs should reuse existing DMs instead of creating new ones if available. The client should prompt for confirmation prior to creating the DM, if the user isn’t being redirected to an existing canonical DM.
  • via - Can be used to denote which servers (authority grammar) to attempt to resolve the resource through, or take action through. An example of using via for routing Room IDs is described below, and is encouraged for use in Matrix URIs referring to a room ID. Matrix URIs can additionally use this via parameter for non-public federation resolution of identifiers (i.e.: listing a server which might have information about the given user) while a more comprehensive way is being worked out, such as one proposed by MSC3020.

Custom query parameters can be specified using the Common Namespaced Identifier format and appropriately encoding their values. Specifically, “percent encoding” and encoding of the & are required. Where custom parameters conflict with specified ones, clients should prefer the specified parameters. Clients should strive to maintain consistency across custom parameters as users might be using multiple different clients across multiple different authors. Useful and mission-aligned custom parameters should be proposed to be included in this specification.

Examples of common URIs are:

  • Link to #somewhere:example.org: matrix:r/somewhere:example.org
  • Link to !somewhere:example.org: matrix:roomid/somewhere:example.org?via=elsewhere.ca
  • Link to $event in #somewhere:example.org: matrix:r/somewhere:example.org/e/event
  • Link to $event in !somewhere:example.org: matrix:roomid/somewhere:example.org/e/event?via=elsewhere.ca
  • Link to chat with @alice:example.org: matrix:u/alice:example.org?action=chat

A suggested client implementation algorithm is available in the original MSC.

matrix.to navigation

A matrix.to URI has the following format, based upon the specification defined in RFC 3986:

https://matrix.to/#/<identifier>/<extra parameter>?<additional arguments>

The identifier may be a room ID, room alias, or user ID. The extra parameter is only used in the case of permalinks where an event ID is referenced. The matrix.to URI, when referenced, must always start with https://matrix.to/#/ followed by the identifier.

The <additional arguments> and the preceding question mark are optional and only apply in certain circumstances, documented below.

Clients should not rely on matrix.to URIs falling back to a web server if accessed and instead should perform some sort of action within the client. For example, if the user were to click on a matrix.to URI for a room alias, the client may open a view for the user to participate in the room.

The components of the matrix.to URI (<identifier> and <extra parameter>) are to be percent-encoded as per RFC 3986.

Examples of matrix.to URIs are:

  • Link to #somewhere:example.org: https://matrix.to/#/%23somewhere%3Aexample.org
  • Link to !somewhere:example.org: https://matrix.to/#/!somewhere%3Aexample.org?via=elsewhere.ca
  • Link to $event in #somewhere:example.org: https://matrix.to/#/%23somewhere:example.org/%24event%3Aexample.org
  • Link to $event in !somewhere:example.org: https://matrix.to/#/!somewhere%3Aexample.org/%24event%3Aexample.org?via=elsewhere.ca
  • Link to @alice:example.org: https://matrix.to/#/%40alice%3Aexample.org

Routing

Room IDs are not routable on their own as there is no reliable domain to send requests to. This is partially mitigated with the addition of a via argument on a URI, however the problem of routability is still present. Clients should do their best to route Room IDs to where they need to go, however they should also be aware of issue #1579.

A room (or room permalink) which isn’t using a room alias should supply at least one server using via in the URI’s query string. Multiple servers can be specified by including multuple via parameters.

The values of via are intended to be passed along as the server_name parameters on the Client Server /join/{roomIdOrAlias} API.

When generating room links and permalinks, the application should pick servers which have a high probability of being in the room in the distant future. How these servers are picked is left as an implementation detail, however the current recommendation is to pick 3 unique servers based on the following criteria:

  • The first server should be the server of the highest power level user in the room, provided they are at least power level 50. If no user meets this criterion, pick the most popular server in the room (most joined users). The rationale for not picking users with power levels under 50 is that they are unlikely to be around into the distant future while higher ranking users (and therefore servers) are less likely to give up their power and move somewhere else. Most rooms in the public federation have a power level 100 user and have not deviated from the default structure where power level 50 users have moderator-style privileges.
  • The second server should be the next highest server by population, or the first highest by population if the first server was based on a user’s power level. The rationale for picking popular servers is that the server is unlikely to be removed as the room naturally grows in membership due to that server joining users. The server could be refused participation in the future due to server ACLs or similar, however the chance of that happening to a server which is organically joining the room is unlikely.
  • The third server should be the next highest server by population.
  • Servers which are blocked due to server ACLs should never be chosen.
  • Servers which are IP addresses should never be chosen. Servers which use a domain name are less likely to be unroutable in the future whereas IP addresses cannot be pointed to a different location and therefore higher risk options.
  • All 3 servers should be unique from each other. If the room does not have enough users to supply 3 servers, the application should only specify the servers it can. For example, a room with only 2 users in it would result in maximum 2 via parameters.

3PID Types

Third-party Identifiers (3PIDs) represent identifiers on other namespaces that might be associated with a particular person. They comprise a tuple of medium which is a string that identifies the namespace in which the identifier exists, and an address: a string representing the identifier in that namespace. This must be a canonical form of the identifier, i.e. if multiple strings could represent the same identifier, only one of these strings must be used in a 3PID address, in a well-defined manner.

For example, for e-mail, the medium is ’email’ and the address would be the email address, e.g. the string [email protected]. Since domain resolution is case-insensitive, the email address [email protected] is also has the 3PID address of [email protected] (without the capital ’e’) rather than [email protected].

The namespaces defined by this specification are listed below. More namespaces may be defined in future versions of this specification.

E-Mail

Medium: email

Represents E-Mail addresses. The address is the raw email address in user@domain form with the domain in lowercase. It must not contain other text such as real name, angle brackets or a mailto: prefix.

In addition to lowercasing the domain component of an email address, implementations are expected to apply the unicode case-folding algorithm as described under “Caseless Matching” in chapter 5 of the unicode standard. For example, Strauß@Example.com must be considered to be [email protected] while processing the email address.

PSTN Phone numbers

Medium: msisdn

Represents telephone numbers on the public switched telephone network. The address is the telephone number represented as a MSISDN (Mobile Station International Subscriber Directory Number) as defined by the E.164 numbering plan. Note that MSISDNs do not include a leading ‘+’.

Glob-style matching

It is useful to match strings via globbing in some situations. Globbing in Matrix uses the following rules:

  • The character * matches zero or more characters.
  • ? matches exactly one character.

Dot-separated property paths

It is useful to express the “path” to an event property by concatenating property names with dots, e.g. content.body would represent a body property in the event’s content.

To handle ambiguity when a property name contains a dot, any literal dot or backslash found in a property name should be escaped with a backslash. E.g. a property m.relates_to in the content would be expressed as content.m\.relates_to. Similarly, a content property named m\foo would be expressed as content.m\\foo.

Other escape sequences are left as-is, e.g. a \x would be treated as a literal backslash followed by ‘x’. It is recommended that implementations do not redundantly escape characters, as other escape sequences are reserved for future use.

Security Threat Model

Denial of Service

The attacker could attempt to prevent delivery of messages to or from the victim in order to:

  • Disrupt service or marketing campaign of a commercial competitor.
  • Censor a discussion or censor a participant in a discussion.
  • Perform general vandalism.

Threat: Resource Exhaustion

An attacker could cause the victim’s server to exhaust a particular resource (e.g. open TCP connections, CPU, memory, disk storage)

Threat: Unrecoverable Consistency Violations

An attacker could send messages which created an unrecoverable “split-brain” state in the cluster such that the victim’s servers could no longer derive a consistent view of the chatroom state.

Threat: Bad History

An attacker could convince the victim to accept invalid messages which the victim would then include in their view of the chatroom history. Other servers in the chatroom would reject the invalid messages and potentially reject the victims messages as well since they depended on the invalid messages.

Threat: Block Network Traffic

An attacker could try to firewall traffic between the victim’s server and some or all of the other servers in the chatroom.

Threat: High Volume of Messages

An attacker could send large volumes of messages to a chatroom with the victim making the chatroom unusable.

Threat: Banning users without necessary authorisation

An attacker could attempt to ban a user from a chatroom without the necessary authorisation.

Spoofing

An attacker could try to send a message claiming to be from the victim without the victim having sent the message in order to:

  • Impersonate the victim while performing illicit activity.
  • Obtain privileges of the victim.

Threat: Altering Message Contents

An attacker could try to alter the contents of an existing message from the victim.

Threat: Fake Message “origin” Field

An attacker could try to send a new message purporting to be from the victim with a phony “origin” field.

Spamming

The attacker could try to send a high volume of solicited or unsolicited messages to the victim in order to:

  • Find victims for scams.
  • Market unwanted products.

Threat: Unsolicited Messages

An attacker could try to send messages to victims who do not wish to receive them.

Threat: Abusive Messages

An attacker could send abusive or threatening messages to the victim

Spying

The attacker could try to access message contents or metadata for messages sent by the victim or to the victim that were not intended to reach the attacker in order to:

  • Gain sensitive personal or commercial information.
  • Impersonate the victim using credentials contained in the messages. (e.g. password reset messages)
  • Discover who the victim was talking to and when.

Threat: Disclosure during Transmission

An attacker could try to expose the message contents or metadata during transmission between the servers.

Threat: Disclosure to Servers Outside Chatroom

An attacker could try to convince servers within a chatroom to send messages to a server it controls that was not authorised to be within the chatroom.

Threat: Disclosure to Servers Within Chatroom

An attacker could take control of a server within a chatroom to expose message contents or metadata for messages in that room.

Cryptographic Test Vectors

To assist in the development of compatible implementations, the following test values may be useful for verifying the cryptographic event signing code.

Signing Key

The following test vectors all use the 32-byte value given by the following Base64-encoded string as the seed for generating the ed25519 signing key:

SIGNING_KEY_SEED = decode_base64(
    "YJDBA9Xnr2sVqXD9Vj7XVUnmFZcZrlw8Md7kMW+3XA1"
)

In each case, the server name and key ID are as follows:

SERVER_NAME = "domain"

KEY_ID = "ed25519:1"

JSON Signing

Given an empty JSON object:

{}

The JSON signing algorithm should emit the following signed data:

{
    "signatures": {
        "domain": {
            "ed25519:1": "K8280/U9SSy9IVtjBuVeLr+HpOB4BQFWbg+UZaADMtTdGYI7Geitb76LTrr5QV/7Xg4ahLwYGYZzuHGZKM5ZAQ"
        }
    }
}

Given the following JSON object with data values in it:

{
    "one": 1,
    "two": "Two"
}

The JSON signing algorithm should emit the following signed JSON:

{
    "one": 1,
    "signatures": {
        "domain": {
            "ed25519:1": "KqmLSbO39/Bzb0QIYE82zqLwsA+PDzYIpIRA2sRQ4sL53+sN6/fpNSoqE7BP7vBZhG6kYdD13EIMJpvhJI+6Bw"
        }
    },
    "two": "Two"
}

Event Signing

Given the following minimally-sized event:

{
    "room_id": "!x:domain",
    "sender": "@a:domain",
    "origin": "domain",
    "origin_server_ts": 1000000,
    "signatures": {},
    "hashes": {},
    "type": "X",
    "content": {},
    "prev_events": [],
    "auth_events": [],
    "depth": 3,
    "unsigned": {
        "age_ts": 1000000
    }
}

The event signing algorithm should emit the following signed event:

{
    "auth_events": [],
    "content": {},
    "depth": 3,
    "hashes": {
        "sha256": "5jM4wQpv6lnBo7CLIghJuHdW+s2CMBJPUOGOC89ncos"
    },
    "origin": "domain",
    "origin_server_ts": 1000000,
    "prev_events": [],
    "room_id": "!x:domain",
    "sender": "@a:domain",
    "signatures": {
        "domain": {
            "ed25519:1": "KxwGjPSDEtvnFgU00fwFz+l6d2pJM6XBIaMEn81SXPTRl16AqLAYqfIReFGZlHi5KLjAWbOoMszkwsQma+lYAg"
        }
    },
    "type": "X",
    "unsigned": {
        "age_ts": 1000000
    }
}

Given the following event containing redactable content:

{
    "content": {
        "body": "Here is the message content"
    },
    "event_id": "$0:domain",
    "origin": "domain",
    "origin_server_ts": 1000000,
    "type": "m.room.message",
    "room_id": "!r:domain",
    "sender": "@u:domain",
    "signatures": {},
    "unsigned": {
        "age_ts": 1000000
    }
}

The event signing algorithm should emit the following signed event:

{
    "content": {
        "body": "Here is the message content"
    },
    "event_id": "$0:domain",
    "hashes": {
        "sha256": "onLKD1bGljeBWQhWZ1kaP9SorVmRQNdN5aM2JYU2n/g"
    },
    "origin": "domain",
    "origin_server_ts": 1000000,
    "type": "m.room.message",
    "room_id": "!r:domain",
    "sender": "@u:domain",
    "signatures": {
        "domain": {
            "ed25519:1": "Wm+VzmOUOz08Ds+0NTWb1d4CZrVsJSikkeRxh6aCcUwu6pNC78FunoD7KNWzqFn241eYHYMGCA5McEiVPdhzBA"
        }
    },
    "unsigned": {
        "age_ts": 1000000
    }
}

Conventions for Matrix APIs

This section is intended primarily to guide API designers when adding to Matrix, setting guidelines to follow for how those APIs should work. This is important to maintain consistency with the Matrix protocol, and thus improve developer experience.

HTTP endpoint and JSON property naming

The names of the API endpoints for the HTTP transport follow a convention of using underscores to separate words (for example /delete_devices).

The key names in JSON objects passed over the API also follow this convention.

Pagination

REST API endpoints which can return multiple “pages” of results should adopt the following conventions.

  • If more results are available, the endpoint should return a property named next_batch. The value should be a string token which can be passed into a subsequent call to the endpoint to retrieve the next page of results.

    If no more results are available, this is indicated by omitting the next_batch property from the results.

  • The endpoint should accept a query-parameter named from which the client is expected to set to the value of a previous next_batch.

  • Some endpoints might support pagination in two directions (example: /messages, which can be used to move forward or backwards in the timeline from a known point). In this case, the endpoint should return a prev_batch property which can be passed into from to receive the previous page of results.

    Avoid having a separate “direction” parameter, which is generally redundant: the tokens returned by next_batch and prev_batch should contain enough information for subsequent calls to the API to know which page of results they should return.